GPS Source’s MS14 GPS military certified splitter has one input and four output ports. Typically, it is used where a roof-mounted GPS antenna’s input is split equally between four GPS receivers.
Description
DATASHEET :
MS14
Overview
GPS Source’s MS14 GPS military certified splitter has one input and four output ports. Typically, it is used where a roof-mounted GPS antenna’s input is split equally between four GPS receivers.
The MS14 can be built to provide direct current from a radio frequency outputting unit to an antenna’s input port. This can be the source of power for that port’s active GPS antenna. The remainder of the radio frequency outputs would have a 200 Ohm direct current load in order to replicate an antenna direct current supply for any receiver attached to that port.
As an option, the MS14 can be delivered with a 28 VDC power supply compliant with MIL-STD-704 for providing power to the active GPS antenna connected to the port.
Features
- Certified to military specifications
- Passive and amplified versions optional
- Transmits Galileo, GLONASS, and GPS L1 and L2
- Gain flatness excellent
- Less than 2 dB L1/L2 gain
Technical Specifications
| Frequency range: | 1 to 1.7 GHz |
| Input/output SWR: | 2.0:1 |
| Gain amplified: | 14-16 dB |
| Noise figure: | 3 dB |
| Amp. balance: | 0.5 dB |
| Phase balance: | 1.0 degree |
| Group delay flatness: | 1 ns |
| Maximum RF input: | 20 dBm amplified, 40 dBm passive |
| Operating temperature: | -40 degrees Celsius to +85 degrees Celsius |
Ordering
The MS14 splitter from GPS Source can be ordered through TerrisGPS. If you have any question about this splitter, please do not hesitate to contact us using the Request Pricing form.
Reviews
There are no reviews yet.